disulfiram price Buy Disulfiram 500 Mg From Australia Discount Prices. General Health. Cheap Prices, Pets, Guaranteed Shipping, Blood Pressure. Buy Retin-A Without Prescription, The owner of Metro Express Car Wash called Golden West because he wanted signage with more impact and style for his vizit this site page
One should calculate the dosage properly to get the utmost benefit from Cialis. This is one of the main concerns for those who buy Cialis online without prescription. Patient usually begins his treatment with 10 mg Cialis pills. This is the optimal dose that suits the majority of men. Person can increase the dose and acquire 20mg pills or, on the contrary, decrease it to 5 mg pills. Do not split the pills. Patients should take whole tablets to make sure that there is no mistake. Where to buy finasteride online without prescription. order now rx

 VLSI TRAINER KIT


ALS-SDA-CPLD/FPGA-01

 

 

INTRODUCTION

The FPGA trainer is a versatile tool for experimenting with standard FPGAs / CPLDs with provision to mount a daughter board on the base board.

The daughter board comes with various FPGA and CPLD options from XILINX and ALTERA. It also provides test pins to connect Pattern generator and Logic analyzer to connect various Inputs and Outputs of the FPGA. Apart from this the base board contains various interface options to readily connect switches and displays etc. A number of tutorial exercises have been worked out. An exhaustive easy to follow documentation has been provided for quick learning of various environments, schematic and VHDL programming.

BASE BOARD

  • 16/32 Toggle switches for I/P selection with 32 LEDs to indicate switch status
  • 16/32 LEDs connected to output ports of the FPGA
  • Two line X 16 Alpha-Numeric LCD display with back-light
  • Four digit 7-segment display
  • 4 X 4 key matrix
  • 2 nos. of Push button switches
  • On board 10 MHz oscillator
  • 10 MHz clock and one of four different frequency clocks (5Mhz, 1Mhz, 500Khz and 100Khz)
  • User I/Os available for Pattern generator and Logic Analyzer connection
  • On-board different supply voltage generator to match the multi-volt with LED indication
  • FPGA/CPLD of different makes (1.8V, 2.5V, 3.3V, 5V) with LEDs to identify the card type
  • 26-pin FRC connector for connecting to ALS standard interface boards like Stepper motor, ADC, DAC, Traffic light controller, Elevator, Printer interface etc
  • Four sets of 20 X 2 female berg connectors to plug the child card

 DAUGHTER BOARD - 1

  • XILINX XC3S50 - FPGA IC
  • Optional 1 MB ROM for stand alone programming
  • Push-button switch to re-initialise the FPGA
  • Power from the bottom board
  • Four sets of 20 X 2 berg connectors for plugging on to the main board
  • JTAG connector for boundary scan programming
  • Mode selection jumpers

 DAUGHTER BOARD - 2

  • XILINX XC9572PC84 - CPLD IC
  • Power from the bottom board
  • Four sets of 20 X 2 berg connectors for plugging on to the main board
  • JTAG connector for boundary scan programming

DAUGHTER BOARD - 3

  • ALTERA EP1C6PQ240C8 - FPGA IC
  • Optional 1 MB ROM for stand alone programming
  • Push-button switch to re-initialise the FPGA
  • Power from the bottom board
  • Four sets of 20 X 2 berg connectors for plugging on to the main board
  • JTAG connector for boundary scan programming
  • Mode selection jumpers

DAUGHTER BOARD - 4

  • XILIN X FPGA X C3S400 with N V ROM

DAUGHTER BOARD - 6

  • XLINIX XC6SLX4TQ144: SPARTAN6  FPGA
  • Platform flash in-system programmable configuration PROM: XCF04SVO20
  • 16 PIN FRC connector to select between base board toggle switch and the 26 pin FRC external interface.
  • JTAG connector (10 PIN FRC connector) for boundary scan programming.
  • Push-button switch to re-initialise the FPGA and DONE LED for program status indication
  • Power from the bottom board.
  • Four sets of 20 X 2 berg connectors for plugging on to the base board.

 

 

ALS-SDA- CPLD / FPGA - 02

 

 

  • Four sets of 52X3 Berg Male connectors provided-to one row lines from FPGA/CPLD are terminated, one Row to VCC and one row to GND
  • The Berg pins for VCC and GND allows a number of Experiments to be conducted, which requires these Inputs
  • 16 outputs from output ports pin (GPGA/CPLD) connected to LEDs through 10 Pin FRC connectors
  • 16 X 2 Alpha Numeric LCD display with back-light connected through 10 Pin FRC connectors to FPGA/CPLD port pins.
  • Four digit 7 segment displays connected through 10 Pin FRC connectors to FPGA/CPLD port pins.
  • 4 X 4 key matrix connected through 10 Pin FRC connectors to FPGA/CPLD port pins.
  • 10 Mhz, 5 Mhz, 1Mhz,500Khz, 100Khz-five different clock frequencies.
  • Onboard multiple Dc supply voltage generator with LED indication.
  • Four sets of 30X2 Male Berg connectors to plug the daughter board.
  • A number of sample program for experiments and to demonstrate the interfacing capalbilites.
  • 26 pin FRC cable for connecting to ALS standard interface like ADC, DAC, DC motors etc.
  • Number of flying leads are provided for external connectors.
  • Four numbers of 10 Pin FRC cables.

DAUGHTER BOARD -1

  • XC3S50 BOARD
  • NVROM for stand alone programming
  • Ten 10 Pin FRC connectors around the daughter board for connection to the on board interfaces like 7 segment LCD etc.
  • JTAG connector (10 pin FRC connector/6 Pin reliamate)for boundary scan programming
  • Mode selection jumpers
  • Four sets of 30X 2 female berg connector for plugging on the main board

DAUGHTER BOARD-2

  • Xilinix SC9572PC84 CPLD
  • Seven 10 Pin FRC connectors around the daughter board for connection to the on board interfaces like Key matrix, LCD etc.,
  • JTAG connector (10 PIN FRC connector/6 PIN reliamate) for boundary scan programming
  • Four sets of 30 X 2 female Berg connector for plugging on to the main board

DAUGHTER BOARD 3 XC3S400 BOARD

  • Xilinx SC3S400 FPGA
  • NVROM for stand alone programming
  • Ten 10 PIN FRC connectors around the daughter board for connection to the on board interfaces like 7 segment, LCD etc.,
  • JTAG connector (10 PIN FRC connector/6 PIN reliamate)for boundary scan programming
  • Mode selection jumpers
  • Four sets of 30 X 2 female berg connector for plugging on to the main board

 

ALS-SDA-FPGA - 03

 

 

ALS-SDA-FPGA-03 TRAINER is a toll for understanding the capabilities of an industry standard FPGA. The board contains various interface options including Switches LEDs, LCD, seven segment display, key matrix, relay, buzzer, Traffic light simulator, Dc motor interface.

  • 16 inputs using DIP switches.
  • 16 outputs through output sports of FPGA connected to LEDs
  • 16x2 Alpha-Numeric LCD display with back-light.
  • Four – digit 7 segment displays.
  • 4x4 key matrix
  • 10Mhz clock and one of four different clocks (5Mhz, 1Mhz,500KHz,100KHz)on-board Buzzer.
  • On- board DPDT relays.
  • On-board Traffic light Simulator
  • On-board Dc motor interface with 2 pin connection to external DC motor.
  • On-board multiple Dc supply voltage generator
  • 26 pin FRC cable for connecting to ALS standard interfaces like ADC, DAC Elevator etc.
  • A number of sample programs to demonstrated the interfacing capabilities.

 

ALS-SDA- FPGA - 04

 

 

 

  • Baseboard & Daughter Board
  • Programming tool & Power supply

BASE BOARD

  • 32 inputs using 8-way four DIP switches. Each input of these switches has an LED indication.
  • 32 outputs through output ports of FPGA connected to LEDs.
  • 16x2 Alpha–Numeric LCD display with back-light through 10 PIN FRC Connectors to FPGA/CPLD port pins.
  • Six-digit 7-segment displays connected through 10 PIN FRC connector to FPGA/CPLD port pins .
  • 4x4 key matrix.
  • 10 MHz, 5 MHz, 1MHz, 500 KHz, 100 KHz - five different clock frequencies.
  • On-board Relay connected using 10 pin FRC to FPGA/CPLD port pins.
  • On-board Traffic Light Simulator connected to FPGA/CPLD port pins using 16 pin FRC.
  • On-board ADC connected to FPGA/CPLD port pins using 16 pin FRC.
  • On-board DAC is provided to generate different waveforms and it is connected to FPGA/CPLD port pins using 16 pin FRC.
  • On-board four level Elevator connected to FPGA/CPLD port pins using 16 pin FRC.
  • Two-pin reliamate is provided on the board to connect external DC motor and it is connected to FPGA/CPLD port pins using 10 pin FRC.
  • 5-way PowerMate is provided to connect external stepper motor and it is connected to FPGA/CPLD port pins using 10 pin FRC.
  • 26-PIN FRC header with Cable for connecting to ALS standard interfaces.
  • 8 inputs using 0ne DIP switches. Each input of these switches has an LED indication.
  • One push button
  • Four sets of 20x2 female berg connector to plug the DAUGHTER BOARD

DAUGHTER BOARD 1

  • XLINIX XC3S50 – FPGA
  • NVROM for stand alone programming.
  • JTAG connector (10 PIN FRC connector) for Boundary scan programming.
  • Mode selection jumpers and LED indication.

DAUGHTER BOARD 2

  • XLINIX XC9572PC44 – CPLD
  • JTAG connector (10 PIN FRC connector) for Boundary scan programming.
  • Four sets of 20×2 Male Berg connector for plugging on to the main board.

DAUGHTER BOARD 3

  • XLINIX XC3S400 – FPGA
  • NVROM for stand alone programming.
  • JTAG connector (10 PIN FRC connector) for Boundary scan programming.
  • Mode selection jumpers and LED indication.
  • Four sets of 20×2 Male Berg connector for plugging on to the main Board.
  • Four sets of 20×2 Male Berg connector for plugging on to the main board.

DAUGHTER BOARD - 6

  • XLINIX XC6SLX4TQ144: SPARTAN6  FPGA
  • Platform flash in-system programmable configuration PROM: XCF04SVO20
  • 16 PIN FRC connector to select between base board toggle switch and the 26 pin FRC external interface.
  • JTAG connector (10 PIN FRC connector) for boundary scan programming.
  • Push-button switch to re-initialise the FPGA and DONE LED for program status indication
  • Power from the bottom board.
  • Four sets of 20 X 2 berg connectors for plugging on to the base board. 

 

NOTE:

  • XILINX USB DONGLE IS ALSO AVAILABLE

  • PATTERN GENERATOR AND LOGIC ANALYZER IS AVAILABLE

  • SYSTEM REQUIREMENTS: MINIMUM 512MB RAM AND DVD DRIVE IS MUST(PRINTER PORT)